- Certified Pre-Owned Equipment
- Tested by a qualified technician
- Ready to be put to great us
- Overall very good cosmetic condition
- Fully working condition
The DMC-CAT is an input card for a Crestron® DigitalMediaÃ¢â€žÂ¢ Switcher, providing one DM® CAT input. The DM CAT input enables the connection of a DM CAT Transmitter or the output of another DM switcher, with a potential cable length up to 450 feet (137 m) using DigitalMedia cable.
In addition to the DM CAT input, the DMC-CAT also includes HDMI® and stereo analog audio outputs. The HDMI output can be used to pass the input signal through to a local audio processor or video monitor, or to feed a second DM switcher for output expansion purposes. The analog audio output, which features programmable volume control, breaks out the stereo audio signal from the DM CAT input and passes it through to feed a multi-room audio distribution system.
NOTE: For applications requiring the simultaneous distribution of surround sound and 2-channel audio signals, use model DMC-CAT-DSP.
The DMC-CAT may also be used with the DMCI DigitalMedia Card Interface to provide a DM CAT receiver solution that's perfect for installation in an equipment rack or AV cart, or as a portable display interface. As a DM CAT receiver, and as a DM switcher input card, the DMC-CAT enables EDID signal detection and format management, CEC device control, and audio breakaway.
|Input Signal Types||DM® CAT (DigitalMediaÃ¢â€žÂ¢ over twisted-pair copper wire)|
|Output Signal Types||HDMI® or DVI to switcher backplane and HDMI OUT connector|
|Formats||HDMI w/Deep Color & 3D, DVI, HDCP content protection support|
|Input Resolutions, Progressive||640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock|
|Input Resolutions, Interlaced||720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock|
|Output Resolutions||Matched to inputs|
|Input Signal Types||DM CAT|
|Output Signal Types||HDMI (multi-channel) to switcher backplane and HDMI OUT connector, analog stereo 2-channel, allows audio breakaway|
|Formats||Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master AudioÃ¢â€žÂ¢, Up to 8ch PCM|
|Digital-To-Analog Conversion||24-bit 48 kHz|
|Performance (analog)||Frequency Response: 20Hz to 20kHz ±0.5dB.
S/N Ratio: >95dB, 20Hz to 20kHz A-weighted.
THD+N: <0.005% @ 1kHz.
Stereo Separation: >90dB
|Volume Gain Range (analog)||-80dB to 0dB, adjustable from 0% to 100%|
|HDMI OUT||(1) 19-pin Type A HDMI female.
HDMI digital video/audio output.
Also supports DVI
|DIGITAL MEDIA, D & M||(1) DM CAT input composed of (2) 8-pin RJ45 female, shielded.
Connects to the DM CAT output of a DM transmitter or other DM device via DM-CBL cable
|NET||(1) 4-pin 3.5mm detachable terminal block, DMNet port.
Connects to the DMNet port of a DM transmitter or other DM device via DM-CBL cable
|AUDIO OUT||(2) RCA female.
Unbalanced stereo line-level audio output with level control.
Maximum Output Level: 2 Vrms.
Output Impedance: 100 Ohms nominal
|DM Cable Length|
DM-CBL DigitalMedia Cable
Maximum length without, between, before, or after repeaters:
Maximum total length using up to 2 repeaters:
|Plug-in card, occupies (1) DM Switcher input card slot, includes metal faceplate w/black finish|
|8.0 oz (227 g)|
CRESTRON DMC-CAT DigitalMedia CAT Input Card for DM Switchers
- Brands Crestron
- Product Code: DMC-CAT
- Availability: 1